Michael
E. Auer received
his Ing. degree (1971) and his Ph.D. degree (1975) with a thesis on
“Design and
Analysis of ECL Circuits” from the Dresden University of Technology.
From 1974‑91
he was an assistant professor at the faculties Electrical Engineering
and
Informatics of this University. From 1991-95 he was with F+O Electronic
Systems
GmbH, Heidelberg (Head of software department).
His
research was related to high-speed digital circuits (ECL), real time
and
network programming, embedded control systems, programming in C, C++,
PERL,
system- and network administration of heterogeneous networks,
telelearning/teleteaching, remote working environments.
In
1995 Michael Auer was appointed Professor of Electrical Engineering of
the
School of Electronics at Carinthia Tech Institute, Villach, Austria and
has
also a teaching position at the University of Klagenfurt. Furthermore
works as
a visiting professor at the Universities of Amman (Jordan), Brasov
(Romania)
and Patras (Greece).
He
is a senior member of IEEE and member of VDE, IGIP, etc., author or
co-author
of more than 150 publications and leading member of numerous national
and international
organizations in the field of online technologies. He is founder and
general chair
of the annual International Conference “Interactive Computer aided
Learning”
(ICL, www.icl-conference.org),
chair
of
the steering committee of the annual International Conference
“Remote
Engineering and Virtual Instrumentation” (REV, www.online-lab.net/rev ) and
chair or
member of the Program Committees of several international conferences
and
workshops. In 2009 he was appointed as member of the Advisory Board of
the European
Learning Industry Group (ELIG, http://www.elig.org
)
Michael
Auer has experience in leading of several national and international
projects
in the fields of remote engineering and technology supported learning.
Under
his guidance international teams developed a Joint European Master
Study
Program “Remote Engineering” (EU project MARE) and a Joint European
Bachelor Study
Program “Information Technology” (EU project BIT2010).
He
is editor-in-chief of the International Journals of “Online
Engineering” (iJOE,
www.i-joe.org ), “Emerging
Technologies in Learning” (iJET, www.i-jet.org ) and
“Interactive Mobile Technolgies” (iJIM, www.i-jim.org ).
Furthermore he acts as an associated editor for Middle and Eastern
Europe of
the “European Journal of Open and Distance Learning” (EURODL, www.eurodl.org ).
In
June 2006 Michael Auer was elected as President and CEO of the
“International
Association of Online Engineering” (IAOE), a non-governmental
organization that
promotes the vision of new engineering working environments worldwide.
Recent
Publications:
Auer, M.; Cotfas, P.; Samoila, C.; Ursutiu,
D.; Zamfira, D.:
“NI-ELVIS
in
Remote
Electronic Laboratory REL”
Proceedings
of
the
1st International Symposium on Remote Engineering and
Virtual
Instrumentation,
(ISBN
3-89958-090-7)
Auer,M.; Dorninger, Ch.; Scharl,
W.:
"Online Lab
Austria – ein Projektverbund Fachhochschule - HTLs"
PCNEWS
90, November 2004
Auer,M.; Klimbacher, C.:
" Einsatz von Embedded Web Servern zur Fernsteuerung
von Hardware "
APS+PC
Nachrichten, April 2005 (ISSN 0941-9519)
Auer,
M.E.;
Klimbacher,
C.; Pester, A.:
Embedded Web Server
Technology for Remote Online Labs, Proceedings of
the IEEE International Symposium on Industrial Electronics, ISIE2005,
Volume 4,
pp 16731676, June 20-23, 2005.
Auer, M.; Bachinger, A.; Lutnik, H.; Tergusek, Ch.:
“Remote Lab Exercises for
a Curriculum in Electronics”
Proceedings
of
the
2nd International Symposium on Remote Engineering and
Virtual
Instrumentation,
(ISBN
3-89958-137-7)
Auer, M.; Klimbacher, Ch.:
“Application of Micro Web
Server Technology in the Remote Control of
Hardware ”
Proceedings
of
the
2nd International Symposium on Remote Engineering and
Virtual
Instrumentation,
(ISBN
3-89958-137-7)
Auer,M.;
De Vora A.:
Distributed Remote
Electronic Lab with Standard Modules
In:
Series
of the Gesellschaft für Informatik (GI)
Volume P-72
(2005), ISBN 3-88579-401-2, ISSN 1617-5468
Volume Editors:
Klaus P. Jantke, Klaus-Peter Fähnrich, Wolfgang S. Wittig
Auer,M.; Auer,U.;
Mittermeir,R. (Edit.):
Ambient and Mobile
Learning
Proceedings of the
Conference ICL2005, Villach/Austria,
28-30 September 2005,
(ISBN 3- 89958-136-9)
Auer,
M.: Distributed Online Laboratory Grid
In:
Rahman Jamal,
Hanns Jaschinski (Hrsg.): Virtuelle Instrumente in de Praxis,
Hüthig Verlag,
Heidelberg München, 2006, ISBN: 3-7785-2976-6
Auer,
M.; Al-Zoubi, A.Y. (Edit.):
Interactive Mobile and
Computer aided Learning
Proceedings
of
the
IMCL2006 Conference, Amman, Jordan, 19-21 April 2006 (ISBN 3-89958-177-6)
Auer,
M.; Safaric, R. (Edit.):
Remote Engineering and
Virtual Instrumentation
Proceedings
of
the
REV2006 Conference, Maribor, Slovenia, 29-30 June
2006 (ISBN 3-89958-194-6)
Gustavsson,
I.; Auer, M.; DeVora, A.:
A General Framework for a
Module Based Distributed Online Lab Grid based
on Open Source Technologies
Proceedings
of
the
REV2006 Conference, Maribor, Slovenia, 29-30 June
2006 (ISBN 3-89958-194-6)
Auer,
M.: Online Laboratories as Interactive Learning Media
In:
Tagungsband: 10.
Workshop „Multimedia in Bildung und Wirtschaft“, 14.-15. September 2006, Ilmenau,
ISSN: 1436-4492
Auer,
M.:
Online Laboratory
Standard Tools for Mobile Learning
Proceedings
of
the
IMCL2006 Conference, Amman, Jordan, 19-21 April 2006 (ISBN 3-89958-177-6)
Auer,
M; Kleber, H.:
Mobile
Learning
Supported
by Micro Web Server Technology
Proceedings
of
the
IMCL2006 Conference, Amman, Jordan, 19-21 April 2006 (ISBN 3-89958-177-6)
Auer,
M.; Dorninger, Ch.; Kleber, H.; Oswal, K,; Seper,
W.:
Online
Lab
Austria
- Results and Experiences
Proceedings
of
the
IMCL2006 Conference, Amman, Jordan, 19-21 April 2006 (ISBN 3-89958-177-6)
Auer,
M.:
DOLLY
–
Distributed
Online Laboratory
Proceedings
of
the
12th International Conference on Technology Supported
Learning and Training (OEB2006), Berlin, Germany, Nov 29 – Dec 01, 2006
Auer,
M.; Martins Ferreira, J.M. (Edit.):
Proceedings
of
the
4th International Conference on Remote Engineering and
Virtual Instrumentation,
(ISBN 978-3-89958-278-9)
Auer, M.; Kleber,
H.; de Moura, J.C.; Garbi Zutin, D.:
Extension
of the NI-ELVIS Platform for Distance Learning, Proceedings
of the REV2007 Conference Porto, 2007
(ISBN:
978-3-89958-278-9)
Auer, M.; Kleber,
H:
Scope
based Signal Analysis in a Remote Laboratory, Proceedings
of the REV2007 Conference Porto, 2007
(ISBN:
978-3-89958-278-9)
Auer, M; Pester,
A; Garbi Zutin, D.:
Open
Source Portal for Online Laboratories, Proceedings
of the REV2007 Conference Porto, 2007
( ISBN:
978-3-89958-278-9)
Auer, M; Garbi
Zutin, D.:
Remote
Prototyping of Analog ASICs, Proceedings
of the REV2007 Conference Porto, 2007
(ISBN:
978-3-89958-278-9)
Auer, M.;
Langmann, R. (Edit.):
Proceedings
of
the
5th International Conference on Remote Engineering and
Virtual Instrumentation, Düsseldorf, Germany, 23-25 June 2008
(ISBN
978-3-89958-352-6)
Auer, M; Garbi
Zutin, D.:
A
Hybrid Lab for Evaluation of Analog ASICs
In:
Magued Iskander (Editor): Innovative Techniques in Instruction
Technology,
E-Learning, E-Assessment, and Education, Springer 2008, ISBN:
978-1-4020-8738-7
Garbi
Zutin, D.; Auer, M; Pester, A:
Online
Laboratories
In:
Online Engineering; Editors: Navarun Gupta, Saikat Ray and Tarek Sobh;
Nova
Science Publishers Inc., New York, 2009, ISBN: 978-1-60741-166-6
Auer,
M.; Sobh, T. (Edit.):
Proceedings
of
the
6th International Conference on Remote Engineering and
Virtual Instrumentation, Bridgeport, CT, USA, 22-25 June 2009
(ISBN
978-3-89958-480-6)
Auer, M.;
Garbi Zutin, D.; Maier, Ch.; Hardison, J.:
Online
Laboratories and the Transition from Web 2.0 to 3.0 Environments
e&I,
Springer Wien New York, 7-8.2009, p. 301-307 (ISSN 0932-383X)
Auer,
M.; Pester, A.:
Online
Engineering as a New Challenge in Higher Education
In:
University & Industry - Knowledge Transfer and Innovation, WSEAS
Press
Athens New York, 2009 (ISBN 978-960-474-069-7)